ADD:Jinlong Industrial Park,Qingchun development zone,

Daiyue district,Taian City,

271000,| China |



发布时间:[2023-12-9 12:43:11]    浏览量:721次
430 Stainless Steel Strip Specifications
Grade: 430
Standard: ASTM/EN/JIS
Thickness: 0.03mm-5.0 mm
Width: 8.5mm-600 mm
Length: coil type or it can be produced as customer requirements
Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc
Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge
430 Stainless Steel Strip Introductions
430 stainless steel strip is a general purpose stainless steel with good corrosion resistance.

It has better thermal conductivity than austenite grade stainless steel strip, a smaller thermal expansion coefficient than austenite strip, heat fatigue resistance.

Due to addition of stabilizing element titanium, it has good mechanical properties of welding.

Because of its chromium content, it is also called 18/0 or 18-0. Compared with 18/8 and 18/10, it contains slightly less chromium, and the hardness is correspondingly lower.

430 Stainless Steel Strip Applications
430 stainless steel strip is widely used for building decoration, fuel heating parts, hot water supply systems, household appliances, banding systems, home appliance parts and hareware.

430 Stainless Steel Strip Chemical Composition
The chemical components of grade 430 stainless steel strip is summarized in the following table:

Grade Standard C Si Mn P S Cr Ni Mo
430 ASTM A240 ≤0.12 ≤0.75 ≤1.00 ≤0.040 ≤0.030 16.00-18.00 ≤0.75